|
TS-h1886XU-RP R2
Cost-effective 10GbE-ready ZFS storage for virtualization and data-intensive enterprise applications
The 2U rackmount TS-h1886XU-RP R2 has twelve 3.5-inch SATA 6Gb/s drive-bays, six 2.5-inch SATA 6Gb/s SSD slots, supports 10GbE and four 2.5GbE connectivity, and features an Intel® Xeon® D-1622 quad-core processor with up to 128 GB DDR4 Error Correcting Code (ECC) memory. Running on the ZFS-based QuTS hero operating system, the TS-h1886XU-RP R2 realizes server-grade performance with dependable reliability. Whether for mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup and recovery applications, the three-year warranted TS-h1886XU-RP R2 delivers a high-performance yet cost-effective NAS solution.
intel-xeon-dvm-readywindows_2019
Petabyte-level storage capacity
Connect to multiple expansion units and achieve PB-level scalability.
Built-in 10GbE connectivity
Two 10GbE SFP+ SmartNIC ports with RDMA boost large file sharing and intensive data transfer.
Up to 128 GB DDR4 ECC memory
Up to 128 GB DDR4 ECC memory that can detect and correct single-bit memory errors, demonstrating high reliability for crucial applications.
Dual redundant power supply
Dual redundant power supplies for enhanced system reliability.
Optimal virtual machine experience
Supports storage for virtualization and can natively host independent virtual machines and containerized apps.
ZFS-based QuTS hero
Ensure data integrity and enhance data security with the ZFS-based QuTS hero operating system.
TS-h1886XU-RP-R2-D1622-32G
CPU : Intel® Xeon® D-1622 4-core processor, burst up to 3.2 GHz
CPU Architecture : 64-bit x86
Floating Point Unit : Yes
Encryption Engine : (AES-NI)
System Memory : 32 GB UDIMM DDR4 ECC (2 x 16GB)
Maximum Memory : 128 GB (4 x 32 GB)
Memory Slot : 4 x UDIMM DDR4
Flash Memory : 5GB (Dual boot OS protection)
Drive Bay : Front: 12 x 3.5-inch SATA 6Gb/s, 3Gb/s
Rear: 6 x 2.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility : 3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
2.5-inch bays:
2.5-inch SATA solid state drives
Hot-swappable : Yes
SSD Cache Acceleration Support : Yes
SR-IOV : Yes
2.5 Gigabit Ethernet Port (2.5G/1G/100M) : 4 (2.5G/1G/100M)
10 Gigabit Ethernet Port : 2 x 10GbE SFP+ SmartNIC port
Pre-installed with a 10GbE PCIe adapter
Wake on LAN (WOL) : Yes
Jumbo Frame : Yes
PCIe Slot : 3
Slot 1: PCIe Gen 2 x4 (x8 Slot)
Slot 2: PCIe Gen 3 x4
Slot 3: PCIe Gen 3 x8 or x4 (x8 Slot)
*Slot 3 is preinstalled with a 10GbE network adapter.
**Slot 3 provides the width of PCIe Gen 3 x8 when Slot 2 is not in use, and provides the width of PCIe Gen 3 x4 when Slot 2 is in use.
Card dimensions for PCIe slot 1:170 x 68.9 x 39.08 mm / 6.70 x 2.71 x 1.54 inches.
Card dimensions for PCIe slot 2:170 x 68.9 x 18.76 mm / 6.70 x 2.71 x 0.74 inches.
Card dimensions for PCIe slot 3:170 x 68.9 x 18.76 mm / 6.70 x 2.71 x 0.74 inches.
Wider cards can be installed if the next PCIe slot will not be used.
USB 3.2 Gen 1 port : 2
Form Factor : Rackmount
LED Indicators : HDD, SSD, Status, LAN, storage expansion port status
Buttons : Power, Reset
Dimensions (HxWxD) : 88.3 × 482 × 549.7 mm
Weight (Net) : 12.73 kg
Weight (Gross) : 18.69 kg
Operating Temperature : 0 - 40 °C (32°F - 104°F)
Storage Temperature : -20 - 70°C (-4°F - 158°F)
Relative Humidity : 5-95% RH non-condensing, wet bulb: 27°C (80.6°F)
Power Supply Unit : 550W(x2), 100-240V
Power Consumption: Operating Mode, Typical : 117.92 W
Tested with drives fully populated.
Fan : System fan: 3 x 60mm, 12VDC
System Warning : Buzzer
Standard Warranty : 3
Max. Number of Concurrent Connections (CIFS) - with Max. Memory : 10000
Others
|
