TS-h3088XU-RP Modernize your IT using the ZFS-based, 25GbE-ready all-flash storage with high performance, high capacity, and low latency
The 2U rackmount TS-h3088XU-RP provides a cost-efficient all-flash storage solution for tackling I/O-intensive and latency-sensitive enterprise applications. With 30 drive bays for 2.5-inch SATA 6Gb/s SSDs, built-in dual-port 25GbE SFP28 SmartNIC, four 2.5GbE LAN ports, PCIe expandability, and up to petabyte-scale storage capacity, the TS-h3088XU-RP satisfies uncompromising performance demands in virtualization, modern data centers, hybrid/multi-cloud applications, mission-critical backup/restore tasks, and file servers that allow thousands of simultaneous connections. The QuTS hero operating system features ZFS data reduction and SSD optimization technologies to get the utmost performance, lifespan, and efficiency from your SSD investments! intel-xeon_Ehdmi
Optimal SSD performance Inline data deduplication and compression, Pool Over-provisioning, and TRIM maximize SSD performance and lifespan.
2 x 25GbE SFP28 ports Dual 25GbE SFP28 and quad 2.5GbE RJ45 high-speed connectivity accelerate virtualization, intensive file access, media file transfer, and large backup/restoration tasks.
3 x PCIe Gen 3 slots PCIe Gen 3 slots allow for installing 5/10/25/40GbE adapters, QM2 cards, or Fibre Channel cards to increase application performance.
Virtualization applications Supports virtualization storage and hosting virtual machines and containerized apps.
Cloud storage gateway Cloud storage gateways realize hybrid cloud applications by working with the cache space reserved on NAS to ensure low-latency data access to the cloud.
Petabyte-scale storage Scalable design to grow with your business by connecting up to sixteen SAS 12Gb/s TL-1620Sep-RP expansion enclosures to attain petabyte-scale storage capacity of 286 disk drives.
TS-h3088XU-RP-W1270-64G CPU : Intel® Xeon® W-1270 8-core/16-thread processor, up to 5.0 GHz CPU Architecture : 64-bit x86 Floating Point Unit : Yes Encryption Engine : (AES-NI) Hardware-accelerated Transcoding : Yes System Memory : 64 GB UDIMM DDR4 ECC (4 x 16 GB) Maximum Memory : 128 GB (4 x 32 GB) Memory Slot : 4 x UDIMM DDR4 For dual-DIMM configurations, you must use a pair of identical DDR4 modules. Flash Memory : 5GB (Dual boot OS protection) Drive Bay : Front: 24 x 2.5-inch SATA 6Gb/s, 3Gb/s Rear: 6 x 2.5-inch SATA 6Gb/s, 3Gb/s The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/ Drive Compatibility : 2.5-inch bays: 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives Hot-swappable : Yes SSD Cache Acceleration Support : Yes 2.5 Gigabit Ethernet Port (2.5G/1G/100M) : 4 (2.5G/1G/100M) 5 Gigabit Ethernet Port (5G/2.5G/1G/100M) : Optional via an adapter 10 Gigabit Ethernet Port : Optional via an adapter 25 Gigabit Ethernet Port : 2 Wake on LAN (WOL) : Yes Only the 2.5GbE port Jumbo Frame : Yes PCIe Slot : 3 Slot 1: PCIe Gen3 x8 or x4 Slot 2: PCIe Gen3 x4 Slot 3: PCIe Gen3 x4 *Slot 1 is preinstalled with a 25GbE network adapter. Please reserve this slot for the 25GbE adapter for the best performance. **Slot 1 provides the width of PCIe Gen3 x8 when Slot 2 is not in use, and provides the width of PCIe Gen3 x4 when Slot 2 is in use. Card dimensions for PCIe slot 1:200 x 68.9 x 28.76 mm / 7.87 x 2.71 x 1.13 inches. Card dimensions for PCIe slot 2:200 x 68.9 x 18.76 mm / 7.87 x 2.71 x 0.74 inches. Card dimensions for PCIe slot 3:200 x 68.9 x 18.76 mm / 7.87 x 2.71 x 0.74 inches. Wider cards can be installed if the next PCIe slot will not be used. USB 3.2 Gen 2 (10Gbps) Port : 2 x Type-C USB 3.2 Gen 2 10Gbps 2 x Type-A USB 3.2 Gen 2 10Gbps HDMI Output : 1, HDMI 1.4b (up to 4096 x 2160 @ 30Hz) Form Factor : Rackmount LED Indicators : HDD, Status, 10 GbE, LAN, storage expansion port status Buttons : Power, Reset Dimensions (HxWxD) : 88.3 × 481.07 × 515.02 mm Excludes ear hook and the protruding part of the Power Supply Unit. Weight (Net) : 12.26 kg Weight (Gross) : 17.87 kg Operating Temperature : 0 - 40°C (32°F - 104°F) Storage Temperature : -20 - 70°C (-4°F - 158°F) Relative Humidity : 5-95% RH non-condensing, wet bulb: 27°C (80.6°F) Power Supply Unit : 550W(x2), 100-240V Power Consumption: HDD Sleep Mode : 129.57 W Power Consumption: Operating Mode, Typical : 261.81 W Tested with drives fully populated. Fan : 3 x 60mm, 12VDC System Warning : Buzzer Max. Number of Concurrent Connections (CIFS) - with Max. Memory : 10,000 Others
|