|
TL-R1220Sep-RP
Enterprise-grade SAS 12Gb/s storage expansion supporting multipath routing and daisy chaining
FOR NAS
The TL-R1220Sep-RP SAS 12Gb/s storage expansion enclosure is designed for expanding the storage space of your QTS or QuTS hero NAS. Up to sixteen expansion enclosures can be daisy-chained via high-speed mini SAS HD cables to support up to 3.4PB raw capacity, ideal for archiving/backing up virtualization applications, surveillance recordings, large data, or multimedia. Featuring Broadcom® SAS DataBolt™ bandwidth optimization technology, the TL-R1220Sep-RP consolidates 6Gb/s infrastructure into 12Gb/s. With four mini SAS HD SFF-8644 Wide Ports, the TL-R1220Sep-RP delivers up to 192Gbps transfer speed when connected to a single host. When connected to a QTS/QuTS hero NAS that supports multipath routing, the TL-R1220Sep-RP can achieve smoother data transmission and continuous system operation.
Note:
1. The QNAP NAS requires QTS 4.5.1 / QuTS hero h4.5.1 (or later) with SAS ports or with a QXP PCIe SAS storage expansion card installed. Check PCIe SAS card compatibility
FOR PC/Server
The TL-R1220Sep-RP SAS 12Gb/s storage expansion enclosure is designed for expanding the storage space of Windows® servers. You can daisy-chain multiple JBODs via high-speed Mini SAS HD cables for flexible storage expansion to meet the requirements of virtualization applications and storing huge data. Featuring Broadcom® SAS DataBolt™ bandwidth optimization technology, the TL-R1220Sep-RP consolidates 6Gb/s infrastructure into 12Gb/s; SAS Zoning technology divides one TL-R1220Sep-RP to into dedicated storage zones for four host servers. When connected to a Windows server that supports multipath routing, the TL-R1220Sep-RP can achieve smoother data transmission and continuous system operation. The TL-R1220Sep-RP also supports Windows S2D (Storage Spaces Direct) failover cluster that combines storage, compute, and networking for centralized management.
TL-R1220Sep-RP
Drive Bay : 12 x 3.5-inch SAS 12Gb/s, SAS/SATA 6Gb/s
The system is shipped without HDD.
For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility : 3.5-inch bays:
3.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA solid state drives
Hot-swappable : Yes
Form Factor : 2U Rackmount
Host Interface : 4 x 12Gb/s SAS 3.0 wide ports (4-wide port) Mini-SAS HD (SFF-8644)
LED Indicators : Front panel: HDD 1-12, Power, Status, Link, Fan error
Rear panel: SAS connector, Enclosure ID
Buttons : Power
Dimensions (HxWxD) : 88.65 × 482.2 × 423.8 mm
Excludes ear hook and the protruding part of the Power Supply Unit.
Weight (Net) : 9.19 kg
Weight (Gross) : 14.03 kg
Max. number of HDDs/SSDs supported : 12
Hard Drive Type : 3.5" or 2.5" SAS 12Gb/s, SAS/SATA 6Gb/s and 3Gb/s drives
Operating Temperature : 0 - 40 °C (32°F - 104°F)
Storage Temperature : -20 - 70°C (-4°F - 158°F)
Relative Humidity : 5-95% RH non-condensing, wet bulb: 27°C (80.6°F)
Power Supply Unit : 300W (x2), 100 - 240V
Power Consumption: Operating Mode, Typical : 163.38 W
Tested with drives fully populated.
Fan : 2 x 80mm, 12VDC
System Warning : Buzzer
Management : Managed via QNAP QTS / QuTS hero OS
1. Supports disk S.M.A.R.T. information
2. RAID expansion enclosure identifier
3. Locate RAID expansion enclosures
4. Locate hard disks on RAID expansion enclosure
5. Smart fan control by detecting system and hard drive temperature
6. In-band SAS firmware update
Others
|
